The Model PT-TAG-CS (referred to as the PT-TAG-CS) utilizes inductive charging to wirelessly charge multiple PT-TAGs simultaneously.

There are two versions of charging stations available including the Model PT-TAG-CS-10 (10-bay option) and the Model PT-TAG-CS-25 (25-bay option).

The PT-TAG-CS is for indoor use only. The charging station may either be laid on an elevated, level surface (such as a table top) or wall mounted to save space. There are two holes on the back of the unit spaced 16 inches apart and two deployable rubber standoff supports for use when wall mounting.

The charging station's charging bays are specially moulded bays to securely hold the tags in place. It takes approximately 3.5 hours to charge a tag. There are LED indicators in each bay to indicate the charging status. A blue LED indicates the tag is on charge; a green LED indicates the tag is off charge (or improperly seated in the bay). There is a charging indication on the PT-TAG as well (the tag's button will flash white).

The PT-TAG-CS can either be laid on an elevated, level surface (such as a table top) or mounted on a wall. It has two holes on the back spaced 16 inches apart and deployable rubber standoff supports for use when wall mounting.

On the front of the unit there are areas to label the individual tags. It is recommended this be labelled according to the PT-TAG's ID.

Under normal operating conditions, battery capacity is indicated by the color and flashing of the PT-TAG's button. The battery capacity indicator's color and flashing patterns are highlighted in the chart. Battery indication will not be available when the tag is charging. While charging, the PT-TAG's LED button indicator will flash white. Also, technology LED indicators on top of the tag will stop flashing. The tag does not communicate while on charge. Once the tag is fully charged, the LED button indicator will turn solid green.

 Tech Sheet